General Directions:

Unscrew adhesive lid and remove inner seal, tightly replace on bottle. Pull off cover to reveal spout. Do not cut. Use spout for a wide line. For precision application and a greater degree of control, firmly twist on Elements Ultrafine Metal Tip. Touch tip to surface before applying pressure. Wipe tip often with a cotton cloth and keep clean with stainless steel pin.

To cover large areas, use spout or brush on thick coating of adhesive. Apply textures with a spoon while adhesive is very wet, white and shiny. Tap textures into adhesive with back of spoon. Elements takes a little more glue than glitter, so allow area to dry before tapping excess textures off. Smaller areas can be tapped off immediately. Adhesive will dry clear and acid free. Let art work dry and seal with a matte, clear acrylic spray. Large pieces may need additional adhesive applied.

Tips/Hints: Elements Earth Textures will stain/dye any material they are left on for long periods of time. Experiment with mixing textures and glitter, save all stray pieces and keep together for future use.